CM001B V5 Microphone Set
- Microphone set: USB condenser microphone with a pop shield, microphone screen and a microhophone arm for fast, professional sound recording at home
- USB condenser microphone with pronounced cardioid characteristics - ideal for speech and vocal recording in a solid metal housing with integrated 32mm electret microphone capsule
- Plug & Play support with Windows and Macs, incl. a shock mount with a 3/8 "to 5/8" thread adapter
The fast and uncomplicated way to the home recording studio:The auna CM001B microphone set V5 has an auna CM001B condenser microphone with a XLR-USB adapter, a pop shield, a microphone screen as well as a microphone arm.
The auna CM001B condenser microphone is designed for digital applications. It can be connected to a PC or laptop via a XLR-USB adapter and USB cable and then will be ready for use immediately thanks to Plug & Play. Specializing in speech and vocals, the balanced sound quality allows you to record in the best sound quality for audio mastering in song production, podcasts or presentations for your own radio stream.
The included shock mount is used to mount the auna CM001B. The nylon covering reduces resonant sound vibrations and noise on the housing. With a 5/8" thread and a 3/8" adapter, the mount can be easily mounted on a commercially available microphone stand. The robust metal chassis and the sturdy steel basket promise a special durability, even with frequent transport. The latter gives the 32 mm electret microphone capsule special protection.
The Malone POP-1 pop shield, which measures 16 cm in diameter, ensures a particularly high quality of voice recording, which filters out unwanted background noises. The auna MP32 MKII microphone screen, which is also included, improves the quality once again with its 5 cm thick acoustic foam to reduce noise and noise reflection
The foldable, easy-to-use Malone ST-1.2 microphone stand helps you quickly so you can easily adjust the microphone. Quickly collapsed, it fits in every pocket and in only a few steps set up. All it needs is a table edge or a shelf on which it is clamped by means of a quick-release screw.
It was never easy to become a part of the modern world of showbizz! Working like the professionals with the auna CM001B USB microphone set V5!
MP32 MKII Microphone Shield Mic Screen Absorber Diffuser Incl. Adapter Silver
Product number: 10028565
Included quantity: 1
Top features:
- Professional microphone shield for practical mounting behind the microphone
- Minimises reflections, noise and room reverberation - ideal for dry voice, vocal and instrument miking
- Flexible lightweight construction with metal guide rail and grippy thumbscrews for adjusting depth and height
- Incl. thread adapters for easy installation on conventional stands and microphone holders
Properties:
- Low weight
- Fast assembly
- Suitable for live applications
- Bolted metal profiles
- Riveted logo
- Material: metal, acoustically optimised high-density foam
Dimensions:
- 45 x 30 x 26 cm (WxHxD)
- Foam thickness: 5 cm
- Weight: 1.6 kg
AI-01 XLR-USB Converter Microphone 16bit 48V Phantom Power Plug & Play
Product number: 10028676
Included quantity: 1
Top features:
- Converter to connect XLR microphones into the USB port of your PC or Mac
- No complicated installation thanks to Plug & Play
- Adjustable volume, gain and monitoring
Properties:
- Connections: 1 x XLR mic input, 1 x mini-USB output, 1 x 3.5mm jack output
- Resolution: 16 bit
- 48V phantom power
- 44.1kHz / 48kHz sampling rate
- Latency-free live mix during recording through headphones connector
- Control LEDs for clipping / peak, proper connection and phantom power
- Velcro for mounting to microphone stands etc.
Dimensions:
- Dimensions: 15.3 x 3.3cm (LxØ)
- Length USB cable: 3m
- Weight: about 250g
CM001B Professional Condenser Microphone Studio XLR Black
Product number: 10011705
Included quantity: 1
Top features:
- Professional condenser microphone
- 32mm capsule with gold membranes
- Distinctive cardioid pattern
- Black heavy-duty brass body with scratch-resistant surface
- Including shockmount, protective case and 5/8'' adapter fortripod mounting
Properties:
- Connection: 1 x XLR output
- Integrated 6dB 100Hz low-cut filter
- Frequency response: 20Hz - 20kHz
- Sensitivity: 36dB + / - 2dB
- Output impedance: 200 ohms
- Noise level: 20 dB
- Max. Gain: 125 dB for 0.5% THD
- Signal to Noise Ratio: 70 dB
- Power supply: via +48V phantom power(Not Included)
Dimensions:
- 5 x 15 cm (ØxH)
- Weight: about 340g
ST-1.2 Microphone Stand Boom Clamp Holder 1.5 kg 35x35 cm Black
Product number: 10030214
Included quantity: 1
Top features:
- Microphone stand with attachment plus bracket for microphone
- Perfect holding properties (supports up to 1.5 KG)
- Attractively simple design: black arms with silver-coloured screws and clamp
- Simple and fast assembly
- Low weight with high load capacity
Properties:
- Optimal for vocal recordings, podcasts, gaming
- Stable positioning by tension springs
- Light weight for a comfortable transport
- Also suitable for mounting lights
- Clamp fastener for mounting on tabletops or shelves
Dimensions:
- Dimensions: about 35 x 35 cm (vertical x horizontal)
- Weight: about 500 g
POP-1 Microphone Pop Shield Wind Screen Pop Guard
Product number: 10011536
Included quantity: 1
Top features:
- Black microphone pop shield with 16cm diameter
- Optimal positioning thanks to the 35cm flexible gooseneck
- Wide-meshed nylon cover with 2 layers
- Suppresses noise arising from the articulation of the B and P sounds
Properties:
- Easy attachment to the stand
- High quality acoustic filter
- Ideal protection for hardware and audio signal
- Material: plastic, nylon, metal
- Colour: Black
Dimensions:
- Diameter: 16cm
- Length of gooseneck: 35cm
- Weight: about 205g
- Microphone set: USB condenser microphone with a pop shield, microphone screen and a microhophone arm for fast, professional sound recording at home
- USB condenser microphone with pronounced cardioid characteristics - ideal for speech and vocal recording in a solid metal housing with integrated 32mm electret microphone capsule
- Plug & Play support with Windows and Macs, incl. a shock mount with a 3/8 "to 5/8" thread adapter