IC-900G-LED USB V2 Microphone Set
- 3-piece USB microphone set with USB condenser microphone, pop shield, and microphone taple top stand in a tripod design
- Gold microphone in pronounced cardioid characteristics with an integrated 16mm electret microphone capsule
- Includes a microphone shock mount with 16mm (5/8'') thread for tripod mounting and a 3/8" to 5/8" adapter
The auna MIC-900G-LED is a condenser microphone designed for digital application requirements. It can connect to a PC or laptop via a USB cable, becoming immediately operation due to Plug&Play.
Specializing in vocals and speech, the auna Mic-900F-LED, with a sample rate of 16 bit/48kHz and a well-balanced cardioid characteristic, enables recordings of the best sound quality and creates a perfect source materGal for audio mastering in song production, podcasts or even moderations for your own radio stream.
The included microphone shock mount is used to mount the auna MIC-900G-LED USB. The nylon cover reduces resonant sound vibrations and noise that may occur on the case. Thanks to its 5/8" thread, the shock mount can be easily attached to the microphone stand that is included in the auna MIC-900G USB microphone set. The tabletop stand in a tripod design is foldable and steplessly height-adjustable, so that the auna MIC-900G-LED USB microphone can be optimally aligned. Slip-resistant rubber pads protect tabletops and desks from scratches.
The microphone pop shield can be mounted directly on the stand using a screw clamp and optimally positioned over the flexible, 35 cm long swan neck. Hardware and sound recording are reliably protected against unwanted noise with the POP-1 anti-pop screen. Thanks to the wide-meshed 2-layered nylon covering, the loss of height in the audio signal is comparatively low.
MIC-900G USB Condenser Microphone Cardioid Studio Gold
Product number: 10031503
Included quantity: 1
Top features:
- USB condenser microphone for studio and podcast applications, audio streaming
- Pronounced cardioid characteristics - ideal for voice and vocal recordings
- Stable golden metal housing with built-in 16mm electret microphone capsule
- Plug & Play support on Windows and Mac
- Incl. microphone spider with 3/8" to 5/8" thread adapter, USB cable and protective pouch
Properties:
- Connection: 1 x USB interface (Type B)
- Supported operating systems: Windows XP, Vista, 7 & 8 or Mac OSX 10.3.9 (Panther) or better
- Frequency range: 30 Hz - 18 kHz
- Sample rate: 16 bit / 48 kHz
- Sensitivity: - 32 dB
- Sound pressure: 136 dB
- S / N Ratio: 68 dB
- Green operation LED
- Power supply: via USB
Dimensions:
- Microphone: 16.5 x 5 cm (HxØ)
- Microphone spider: 9 x 9 x 6 cm (WxHxD)
- Cable length: about 3 metres
- Weight microphone: about 295 g
- Weight microphone spider: about 200 g
PR5-ST-4 Microphone Table Stand Desktop Microphone Stand Foldable Black
Product number: 10031659
Included quantity: 1
Top features:
- Black microphone table stand in tripod design
- Ideal for the installation of microphones or recording devices
- Infinitely adjustable height
- Stable, foldable tripod construction
Properties:
- Foldable construction
- Locking screw
- Anti-slip rubber feet for the protection of table tops
- Material: metal, plastic
- Colour: black
Dimensions:
- Height: 12 - 19.5 cm
- Max. area: 19 x 16,5 cm (WxD)
- Weight: about 154 g
POP-1 Microphone Pop Shield Wind Screen Pop Guard
Product number: 10011536
Included quantity: 1
Top features:
- Black microphone pop shield with 16cm diameter
- Optimal positioning thanks to the 35cm flexible gooseneck
- Wide-meshed nylon cover with 2 layers
- Suppresses noise arising from the articulation of the B and P sounds
Properties:
- Easy attachment to the stand
- High quality acoustic filter
- Ideal protection for hardware and audio signal
- Material: plastic, nylon, metal
- Colour: Black
Dimensions:
- Diameter: 16cm
- Length of gooseneck: 35cm
- Weight: about 205g
- 3-piece USB microphone set with USB condenser microphone, pop shield, and microphone taple top stand in a tripod design
- Gold microphone in pronounced cardioid characteristics with an integrated 16mm electret microphone capsule
- Includes a microphone shock mount with 16mm (5/8'') thread for tripod mounting and a 3/8" to 5/8" adapter